Custom Screensaver On The Non-touch Kindle 4 (2024)

98 Comments

Mike Szczys

January 5, 2012

[Kubbur87] put together a guide to replacing the Non-touch Kindle 4 screensavers with your own images. We’ve already seen a way to remove the Special Offers banners from the newest version of Kindle Hardware, this hack lets you use your own600×800 Portable Network Graphics (.png) file instead of the images pushed to the device by Amazon.

Frankly, we’re shocked at how easy this hack is. [Kubbur87] puts the device into developer mode, enables SSH, and then goes to work on the Linux shell within. It seems the only line of protection is the root password which he somehow acquired.

After the break you’ll find his videos which show how to enable developer mode and how to perform this hack. By putting a file named “ENABLE_DIAGS” with no extension on the device when it is recognized as a USB storage device you’ll gain access to the diagnostic menu system. From there it’s just a matter of cruising that menu to get SSH access. Like we said, you’ll need the root password, that that’s as easy as naming your favorite video game character from the 1980’s.

Getting into developer mode:

[youtube=http://www.youtube.com/watch?v=XZEhsCKgMHw&w=470]

Replacing the screensavers:

[youtube=http://www.youtube.com/watch?v=fG_pGDMsAYo&w=470]

So amazon set the root password to “mario”??? That’s not even a long password. I would expect a bunch of random numbers and letters. I mean seriously that’s the most secure thing they could come up with?

Report comment
Reply
1. but… it’s-a me, mario!
  
  Report comment
  Reply
  1. LMAO XD
    
    Report comment
    Reply
2. the administrator password for all of the computers, and the root password for all of the switches/routers on the network at my highschool was ‘wintergreen.’ and it’s not even a small school district; my graduating class was 900 students.
  
  Report comment
  Reply
3. Sadly, that password doesn’t work for me.
  
  Report comment
  Reply
  1. u can use this to generate the password
    http://members.ping.de/~sven/kindle.html
    
    Report comment
    Reply
  2. Root PW Gen.
    http://members.ping.de/~sven/kindle.html
    
    Report comment
    Reply
4. IFAIR, mario and luigi are hardware and/or software revisions of the kindles. But it’s long since I worked with this so it could be wrong.
  
  Report comment
  Reply
Buy a Nook Touch.
Cheaper, smaller, 4 page-turn buttons, appears as a USB storage device (where you can upload any books you want just by copying them there), and there’s even a nice “screensaver” image folder built-in.

Report comment
Reply
1. Not only that, but you can also get it rooted with android.
  
  Report comment
  Reply
  1. you can also get it rooted with the root password Kubbur87 provided…
    
    Report comment
    Reply
  2. Nice work, but why does everything need to be a friggin youtube video now. root password + the folder the screensavers are in would save me nearly 5 minutes of incredibly slow typing and sh*t music
    
    Report comment
    Reply
    1. But then the “uploader” cant make money from you which is why they are youtube videos ego and cash .. rather than a five line text page
      
      Report comment
      Reply
So will Amazon replace it when you connect online

Report comment
Reply
1. it hasnt done it with my kindle yet
  
  Report comment
  Reply
simpe: In the Description in the video:
user: root
pass: mario
if that doesnt work try this http://members.ping.de/~sven/kindle.html

Report comment
Reply
You might want to note that this is only for non-special offers kindle from what I can tell. Spent 5 minutes doing this before I realized this wasn’t compatible with the other kindle hack.

Report comment
Reply
1. did u try it out ?
  
  Report comment
  Reply
2. I realized that as well, but not until I had restarted my kindle several times over, constantly going into the filesystem of the kindle to figure out how to remove the “special offers”. Maybe next time.
  
  Report comment
  Reply
See http://wiki.mobileread.com/wiki/Kindle_Touch_Hacking

Report comment
Reply
So… How do I get out of development mode? :P

Report comment
Reply
1. go to exit, reboot or disable diags – disable diagnostics – and press the left button on the 5 way button
  
  Report comment
  Reply
2. Just kidding, i found out how. Just go into the last menu and select disable development mode (or something like that, i forget already)and restart it
  
  Report comment
  Reply
I just got THIS hack working with my KSO 4NT.
After you setup the folders like in the video, run these 4 simple commands.
/etc/upstart/framework stop
mv /var/local/adunits /var/local/adunits.bkp
touch /var/local/adunits
/etc/upstart/framework start
src: http://www.mobileread.com/forums/showthread.php?t=139279

Report comment
Reply
1. I had trouble removing ads and getting the screensaver to work on my Kindle 4 with Special Offers, but after some trial and error, the following has worked. I’ll report back if the ads come back:
  mntroot rw
  mkdir /mnt/us/screensaver
  mount /dev/mmcblk0p1 /mnt/base-mmc
  mv mnt/base-mmc/opt/amazon/screen_saver/600×800
  ln -sfn /mnt/us/screensaver /mnt/base-mmc/opt/amazon/screen_saver/600×800
  mnt/base-mmc/etc/init.d/framework stop
  mv /var/local/adunits /var/local/adunits.bkp
  touch /var/local/adunits
  mnt/base-mmc/etc/init.d/framework start
  Reply if it worked for you
  
  Report comment
  Reply
  1. Hi, this method was successful. It seem to work even when I’m on line- no ads were downloaded.
    One thing bothers me- Before using this method I already had created “screen_saver” and had two pictures in it. After using Your method these pics were seen as screen savers. When I added some new pics to this folder, they didn’t show up as screen savers.
    What I did was repeating whole thing with your method, and now all the pictures that were in “screen_savers” are used as they should be :D
    Thanks for this great idea :D
    
    Report comment
    Reply
  2. I worked!!! Thanks so much ;)
    
    Report comment
    Reply
    See Also
    How To Change The Wallpaper On Amazon Fire Tablet | Robots.net
2. Thank you!! I can verify that this works on a KSO 4NT for v4.1.3.
  
  Report comment
  Reply
why I always got access denied when typing the password? I am pretty shure the password is fionaldef (serial number 1331440003), can any one help me? thank you..

Report comment
Reply
I used these:
mntroot rw
mkdir /mnt/us/screensaver
mount /dev/mmcblk0p1 /mnt/base-mmc
mv /mnt/base-mmc/opt/amazon/screen_saver/600×800 /mnt/base-mmc/opt/amazon/screen_saver/600×800.old
ln -sfn /mnt/us/screensaver /mnt/base-mmc/opt/amazon/screen_saver/600×800
But I get an error half way through. I’ve never used Linux before, so I don’t know what’s going on. =(
login as: root
root@192.168.15.244‘s password:
#################################################
# N O T I C E * N O T I C E * N O T I C E #
#################################################
Rootfs is mounted read-only. Invoke mntroot rw to
switch back to a writable rootfs.
#################################################
[root@[192_168_15_244] root]# mntroot rw
system: I mntroot:def:Making root filesystem writeable
[root@[192_168_15_244] root]# mkdir /mnt/us/screensaver
[root@[192_168_15_244] root]# mount /dev/mmcblk0p1 /mnt/base-mmc
mount: /dev/mmcblk0p1 already mounted or /mnt/base-mmc busy
mount: according to mtab, /dev/mmcblk0p1 is mounted on /cust

Report comment
Reply
1. im not sure whats going on there, all the commands seem to be correct
  did you figure it out already perhaps ?
  
  Report comment
  Reply
Dear All,
I can do it upto SSH and got root reply, but the password really tripped me a lot: it replied me “access denied” all the time after I input password. I got password “fionaldef” for my serial number “1331440003” from Putty, and the website mentioned above as well, but it seems it was wrong or something else I did not do it right?
Thanks for advice.

Report comment
Reply
Got it and worked through overall steps. But after I put .png file into “screensaver” folder and turn off, the screen is a blanket one, my god!! How can I solve it?

Report comment
Reply
1. did you restart the kindle after putting the pictures on it ?
  restarting means going to the settings menu, pressing the alternative menu button and highlighting restart and pressing the middle way button
  
  Report comment
  Reply
  1. I “restart” several time but in vain, the sreen still showed “blank” when Kindle slept or I pushed the power button.
    Let me make sure one thing I was doing right or wrong: after SSH and write in those commands shown in your video, I leave diagnostic mode and restart Kindle, then it showed a “screensaver” folder under Kindle, on my Windows screen. Then I drop in .PNG file into the folder, then I restart Kindle. Is the procedure right?
    Thank you for reply.
    
    Report comment
    Reply
  2. >>did you restart the kindle after putting the pictures on it ?
    restarting means going to the settings menu, pressing the alternative menu button and highlighting restart and pressing the middle way button
    I “restart” several time but in vain, the sreen still showed “blank” when Kindle slept or I pushed the power button.
    Let me make sure one thing I was doing right or wrong: after SSH and write in those commands shown in your video, I leave diagnostic mode and restart Kindle, then it showed a “screensaver” folder under Kindle, on my Windows screen. Then I drop in .PNG file into the folder, then I restart Kindle. Is the procedure right?
    Thank you for reply.
    Yung Jung Chang
    
    Report comment
    Reply
  3. verify the symbolic link in the console by typing
    “ls -l”
    without the quotas
    you should see a symbolic link to the screensaver folder in the root, if not, you have done something wrong
    
    Report comment
    Reply
I’ve had good success with the screensaver hack. However, I notice that now the screensavers don’t transition through the images. A new image only shows up after you take it out and put it back into screensaver mode. Is there any way to set a transition timer for it to go through the photos in the folder?

Report comment
Reply
1. thats like that without the hack…
  
  Report comment
  Reply
So, this worked great, but now I’m in a bind. I have a small scratch on the surface, and I want to swap it out before the warranty is up. Is there a reverse to this? I thought the factory reset would work, but it didn’t. Now, instead of custom screensavers, I’ve got blank white?
Any thoughts?
Thanks.

Report comment
Reply
1. delete the screensaver folder and then
  go back to console and remove the 600×800 folder, then rename the 600×800.old to 600×800 and you should be fine
  command for remove a folder is rm -r “folder”
  command for rename is mv “/pathtofolder/folder.old” “/pathtofolder/folder”
  all this without quotas
  example:
  #mv /home/kubbur/sdb/backup /home/kubbur/sdb/backup.old
  ##this renames the folder backup to backup.old
  example:
  #rm -r /home/kubbur/sdb/backup
  this removes the folder backup and all its contents
  just remember to enable write access when u start the console with “mntroot rw”
  
  Report comment
  Reply
  1. Thank you for responding. I tried doing this a couple times before giving up. I’m just now seeing that the reason I was having difficulties was because the backup folder was created wrong. In the pastebin.com raw data, the 4th step shows up as two lines, so it created a folder called /mnt/base-
    Thank you so much for your quick response and help.
    
    Report comment
    Reply
  2. Tried this, but received this message in putty:
    mv: can’t rename ‘/mnt/base-mmc/opt/amazon/screen_saver/600×800.old’: No such file or directory
    I followed your original guide, so the folders should be as you’d listed?
    Any help would be appreciated.
    
    Report comment
    Reply
My Kindle won’t enter developer mode. I have a Mac OSX 10.5, with a Kindle 4.1. Can anyone help me out here? Thanks.

Report comment
Reply
1. mount the kindle, notice where it mounts, go to terminal and cd to the root of the kindle and do
  “touch I_CANT_REMEMBER_THE_FILENAME”
  without the quotas
  
  Report comment
  Reply
Thanks Kubbur, now I successfully hacked kindle 4 and I can put one picture into it and it showed on the screen when I turns the kindle off.
But, however,screensaver can only show one pic and the name need to be 01N .png, even I rename the other pic as:
02N2, 03n4, 04N, 05N”.”.”””
Again, Thanks for helping so farm

Report comment
Reply
Hi Guys,
First of all thanks for tips and advices. But i have some problems. I’m not good with these things.
According to the video, after clicking on the right button in the enable usbnet section my kindle’s connection with my computer’s lost. Is it normal?
Second problem, i really don’t know how to use PuTTY :S and that’s why i can’t connect that with my kindle. By the way do i have to change my ip address to kindle’s?

Report comment
Reply
FInally, I got through it.
I deleted linked 600×800 folder and made another 600×800 folder, then I copied all the new .png files I want into this new folder, with the file name coding 01N, 02N2, 03N2, 04N, 05N……as original screensaver files.
Then it worked!!
Note it is really a SSH work, but that is not so difficult as I thought before.
Thnak you all especially Kubbur’s great help!!

Report comment
Reply
1. An Update:
  Directly put 600×800 *.png file into the path as below, and no need to change file name,IT ALSO WORK!! every pic will be displayed.
  /mnt/base-mmc/opt/amazon/screen_saver/600×800
  
  Report comment
  Reply
If you have access to a *nix shell, whether that’s a Linux/BSD box, a Mac, or even an Android phone with local shell, here’s a script to find the password for a Kindle 4 Non-Touch. Just change the second line so that the value of $serno is your Kindle’s serial number.
#!/bin/sh
serno=LOLNOTTELLINGTHEINTERNET
echo fiona$(echo $serno | md5sum | cut -b 8-11)

Report comment
Reply
so once you’ve gotten into the diag menus how do you return to the normal kindle… It froze up on me!!! HELP I THINK I KILLED IT

Report comment
Reply
WELL…I GOT A CHALLENGE FOR YOU UNLIKE ANY OTHER. I GOT A “STORE MODEL” KINDLE DX DEMO. AND IT ONLY PLAYS THE “DEMO SCREEN” OVER AND OVER AGAIN… HOW CAN I GET IT TO BE A REGULAR KINDLE DX AGAIN AND GET THE “DEMO MODE” OFF?? NOBODY…I MEAN NOBODY HAS BEEN ABLE TO FIGURE IT OUT. ARE YOU GOOD ENOUGH TO HELP ME WITH IT?? I WILL BE VERY HAPPY IF YOU CAN!

Report comment
Reply
1. what are you trying to accomplish with your caps lock button ?
  but i would need a ssh access to your kindle to check it out
  
  Report comment
  Reply
  1. ACTUALLY, IM SORRY, BUT MY CAPS BUTTON IS STUCK. EMBARRASSING, YES. DONT WORRY IM NOT TRYING TO BE RUDE WITH CAPS ALL THE TIME. I SHOULD BE GETTING MY NEW ON IN THE MAIL SOON. BUT THANK YOU FOR RESPONDING TO ME. I REALLY APRECIATE IT. BUT ANYWAYS, YEA, IS THERE SOME KIND OF ‘FORCE OVERIDDE” THAT YOU CAN LINK ME TO SO I CAN WIPE EVEN THE FIRMWARE THATS ON IT AND THEN RE INSTALL THE SOFTWARE?
    
    Report comment
    Reply
i followed all the steps but my png files wont show up. it keeps saying ‘please connect wirelessly to download the latest special offers’
anyone else getting this?

Report comment
Reply
1. http://y42k.files.wordpress.com/2011/10/img_3530.jpg?w=223&h=300
  this is the screen i get
  
  Report comment
  Reply
So I have done the hack and get my screen savers to come up when I hit the button. When I go to register with my account it replaces them with the ads and I can’t get them back (I am sure I can reset to factory defaults and do everything again if I need to).
Is there a way to have custom screensavers and register to make buying books easy? or will I have to download purchased books to computer and then transfer them that way.
Thanks!

Report comment
Reply
Any1 help me too? I can’t even get in diag mode… I edit the diag thing in the kindle root then go to settings and restart. then nothing happens. it just restarts as it should. the video doesn’t explain much. Am I doing it wrong?

Report comment
Reply
Edit: got to enable usbnet but idk how to use puty properly. it gives an error when trying to connect

Report comment
Reply
Bummer, I followed the instructions and get a white screen. I saw the answer to the other person who got the white screen, but I am new to putty and have no idea how to delete and replace lines of code. I am now stuck with a white screen kindle, or can restore back to the ads. I appreciate the instructions, but I wish it was correct straight from the beginning. I have a beautiful star trek screen I wanted to use.

Report comment
Reply
I did the hack and everything seems to have taken however I a white screen after I restart my kindle at ideas?
Thanks

Report comment
Reply
you need to place wallpapers in the folder before restart and they have to have the specific format. What I can’t seem to do is connect with putty. it gives a timeout error and idk how to fix it

Report comment
Reply
anyone in the UK that can do this for me ?? if i posted it to you

Report comment
Reply
For Mac´s, you have to know which device to configure. In Terminal:
MacBook-Air:~ aramos$ ifconfig
lo0: flags=8049 mtu 16384
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
gif0: flags=8010 mtu 1280
stf0: flags=0 mtu 1280
en0: flags=8863 mtu 1500
ether 58:55:ca:fa:2f:45
inet6 fe80::5a55:caff:fefa:2f45%en0 prefixlen 64 scopeid 0x4
inet 192.168.0.13 netmask 0xffffff00 broadcast 192.168.0.255
media: autoselect
status: active
en4: flags=8863 mtu 1500
ether ee:29:00:00:00:15
inet6 fe80::ec29:ff:fe00:15%en4 prefixlen 64 scopeid 0x5
inet 169.254.64.99 netmask 0xffff0000 broadcast 169.254.255.255
media: autoselect (10baseT/UTP )
status: active
vboxnet0: flags=8842 mtu 1500
ether 0a:00:27:00:00:00
MacBook-Air:~ aramos$ sudo ifconfig en4 192.168.15.1
Password:
MacBook-Air:~ aramos$ ssh root@192.168.15.244 -p 22
The authenticity of host ‘192.168.15.244 (192.168.15.244)’ can’t be established.
RSA key fingerprint is a7:cc:49:1d:64:b0:3c:73:ab:38:fd:dd:6e:a0:aa:aa.
Are you sure you want to continue connecting (yes/no)? y
Please type ‘yes’ or ‘no’: yes
Warning: Permanently added ‘192.168.15.244’ (RSA) to the list of known hosts.
root@192.168.15.244‘s password:
#################################################
# N O T I C E * N O T I C E * N O T I C E #
#################################################
Rootfs is mounted read-only. Invoke mntroot rw to
switch back to a writable rootfs.
#################################################
[root@[192_168_15_244] root]# mntroot rw
system: I mntroot:def:Making root filesystem writeable
[root@[192_168_15_244] root]# mkdir /mnt/us/screensaver
[root@[192_168_15_244] root]# mount /dev/mmcblk0p1 /mnt/base-mmc
and the rest of directions…

Report comment
Reply
Hi, I cannot mount mmcblk0p1
[root@[192_168_15_244] root]# mount /dev/mmcblk0p1 /mnt/base-mmc
mount: /dev/mmcblk0p1 already mounted or /mnt/base-mmc busy
mount: according to mtab, /dev/mmcblk0p1 is mounted on /cust
so I tried:
[root@[192_168_15_244] root]# mv /cust/opt/amazon/screen_saver/600×800 /cust/opt
/amazon/screen_saver/600×800.old
mv: can’t rename ‘/cust/opt/amazon/screen_saver/600×800’: Read-only file system
I’m stuck now… any idea?

Report comment
Reply
This tutorial ERASE all the files necessary to Kindle screensaving, so be careful. Do a copy in your computer before playing with your Kindle. Even I was unable to restore the files by doing a firmware update, ´cause my Kindle is in the last update and doesn´t permit upgrades to it.

Report comment
Reply
1. Erase? It’s only “make directory”, “rename” and “create link” commands, they can’t erase anything! It shows you to enter the mode when you can erase important files all right, but if followed verbatim it does not delete anything from your Kindle. “Backup files” is always good advice none the less.
  
  Report comment
  Reply
Hello
I have a problem – only one of screensavers is ever shown. I don’t care so much, but I’d love to have all 3 rotate around. Any ideas what I might get f*cked up?

Report comment
Reply
hi, my computer is not reading the kindle after i enable USBnet and exit out, so I’m stuck on that stage of this process. any ideas?

Report comment
Reply
OMG! I AM THE PASSWORD!

Report comment
Reply
I’ve done this correctly, but now there’s an update for the software, and the install fails. There’s some way to undo the hack and install the update? Please, help!

Report comment
Reply
Please, help me. I’ve managed to use my screensavers but now i can’t update the software with the new 4.10 version. Here’s someway i can undo the hack? Please!

Report comment
Reply
1. Have not tested it myself, but it should work (will test it this evening, don’t have time now.
  follow the same procedure, BUT:
  instead of typing these 2 commands:
  mv /mnt/base-mmc/opt/amazon/screen_saver/600×800 /mnt/base-mmc/opt/amazon/screen_saver/600×800.old
  ln -sfn /mnt/us/screensaver /mnt/base-mmc/opt/amazon/screen_saver/600×800
  use these 2:
  unlink /mnt/base-mmc/opt/amazon/screen_saver/600×800
  mv /mnt/base-mmc/opt/amazon/screen_saver/600×800.old /mnt/base-mmc/opt/amazon/screen_saver/600×800
  this should revert everything (all the other stuff was just to get to a position where you could type those commands ;)
  If it doesn’t work, I’ll leave a reply this evening (Europe)
  
  Report comment
  Reply
  1. Yes, it works.
    You will have to use this http://members.ping.de/~sven/kindle.html?# to get your root password.
    I have not re-applied the wallpaper hack yet, but I guess this hasn’t changed, since the hack is just to exchange the default wallpaper folder with a link to the windows-mountable device.
    
    Report comment
    Reply
  2. Thanks, but it doesn’t work, at leaste on my kindle. When i type
    unlink /mnt/base-mmc/opt/amazon/screen_saver/600×800
    it says -sh: unlink not found
    and when i type the other command, it says “no such file or directory”.
    I am afraid i wrecked up something O.o
    
    Report comment
    Reply
  3. Oh yes, sry, use
    rm /mnt/base-mmc/opt/amazon/screen_saver/600×800
    instead of unlink, since kindle doesn’t know unlink.
    But don’t do this unless you can also do the next step (if you have already done this, the ln command from the tutorial will undo this).
    And now to the second step:
    did you already move the folder into your custom-screensaver folder? look if it is there And tell me. (If you executed the second command before the first (or after the first one failed), you may have moved it there ;) )
    did you use another tutorial? If yes, can you give me a link?
    use
    ls /mnt/base-mmc/opt/amazon/screen_saver/
    to get a list of files/directories in this directory. Is there anything that looks like a backup of the original screensavers? the “adunits” (or similar) folder is unimportant here.
    Or: where did you move the original folder? (tell me how the mv command you used looked like)
    Just to tell you what you’re even doing ;)
    ln arg0 arg1
    arg0 is an existing file or folder, arg1 a non-existing one.
    creates a link from arg1 to arg0
    rm arg0
    removes/deletes arg0
    mv arg0 arg1
    arg0 is an existing file folder
    if arg1 is a folder: moves arg0 into this folder
    otherwise it will move arg0 to arg1 (and overwrite an existing file)
    and sorry for this a-bit-untidy-post ;)
    
    Report comment
    Reply
  4. As i tought i screwed something. When i list the resources in the screen_saver folder, there is only the adunits foder, and nothing else. Maybe i managed to delete the old screensavers? Can i do something to fix it?
    
    Report comment
    Reply
  5. Ah no, i was wrong: there are two things inside the folder, 600×800 and adunits. There’s not 600×800.old folder.
    
    Report comment
    Reply
  6. The 600×800 folder: which files does it contain?
    ls /mnt/base-mmc/opt/amazon/screen_saver/600×800/
    are those your custom screensavers or the original ones?
    If they are your custom screensavers, just ignore them, they will be deleted by the rm command.
    If they are the original ones, you’re done.
    
    Report comment
    Reply
2. Find them in the internet (or somewhere else).
  Make sure that they are complete and unchanged (I think the update procedure checks your device for modifications, and when it detects the custom screensavers, it is cancelled)
  copy them to your kindle (plug it in in normal mode, like you would copy your custom screensavers) into a new folder (e.g. a new folder named “orig_screensavers”
  then repeat the whole procedure, but instead of the mv command, use:
  cp -r /mnt/us/orig_screensavers /mnt/base-mmc/opt/amazon/screen_saver/600×800
  PS: if you can access another kindle with existing wallpapers, you can copy them to the drive you could insert to your PC with
  cp -r /mnt/base-mmc/opt/amazon/screen_saver/600×800 /mnt/us/orig_screensavers
  (you need to gain console access again – you know the procedure ;)
  In this case, only use the mntroot and mount commands; those will not change anything that lasts until after the reboot.
  PPS: cp: works like mv, but copies instead of moving; -r to copy whole folders.
  
  Report comment
  Reply
3. I have the same problem, but none of the passwords will work any more, mario worked when i first did the hack, but now it doesn’t, and neither does the one that that website provided after putting in my serial code. Help Please!
  
  Report comment
  Reply
Hello sylar_5,
I followed carefully your instructions and executed all these commands in order:
mntroot rw
mkdir /mnt/us/screensaver
mount /dev/mmcblk0p1 /mnt/base-mmc
rm /mnt/base-mmc/opt/amazon/screen_saver/600×800
mv /mnt/base-mmc/opt/amazon/screen_saver/600×800.old /mnt/base-mmc/opt/amazon/screen_saver/600×800
This has restored the original wallpapers, but I still cannot upgrade to 4.1 (erreor U006).
What should I do?
Thanks for your help!

Report comment
Reply
1. I am no expert on this device. I just knew what I did when applying this hack because it’s some simple linux commands…
  Get to know the Linux shell (at least a bit) and then try to restore the original folder. Maybe download the original wallpapers again and then store them at the right location.
  If you execute those commands twice, you may have deleted the original folder.
  And never apply such hacks if you do not know what you are doing!!
  A quick google search for “kindle update error u006” gave me:
  http://www.mobileread.com/forums/showthread.php?t=181493
  Maybe this will help.
  Use some kindle forums to discuss your problem. A comment thread doesn’t seem appropriate…
  
  Report comment
  Reply
Hmm…
Trying to remove hack to upgrade sw from 4.0.1 to 4.1, but the host password appears to have changed.
I’m sure that it was ‘mario’ when I applied hack, but that no longer works.
Tried the serial-number-generator, but the ‘fionaxxx’ passwords aren’t working either. (tried using the serial no on box & a different one under ‘settings’ on kindle itself)
Any ideas?

Report comment
Reply
1. This is what I mean, i want to remove it, but it appears the password has changed since i applied the hack! please help!
  
  Report comment
  Reply
Just reverted my 4.0.1 hack back to normal to install 4.1.0! It took a while (mainly due to my absent-minded decision to delete the .old file that backs it up) but this is what I did:
1. The password here worked for me: http://members.ping.de/~sven/kindle.html# I typed in my serial code sans spaces and it worked first time.
2. If you still have the .old folder, do the mv /mnt/base-mmc/opt/amazon/screen_saver/600×800.old /mnt/base-mmc/opt/amazon/screen_saver/600×800 command. Make sure to take care when copying and pasting commands, as my putty client replaces Xs with ?s.
3. If you don’t, you can find all the old screensavers here: http://www.kubizo.com/kindle-screensaver-images/displayimage.php?pid=3411. DO NOT RENAME THE IMAGES. Their names are exactly how the kindle likes them. Put them all into a folder on your kindle root.
4. Do a ls /mnt/base-mmc/opt/amazon/screen_saver/ command to see what files are there. If you have 800×600 and adunits, that’s fine. If your 800×600 file has vanished (like mine!) do a mkdir /mnt/base-mmc/opt/amazon/screen_saver/600×800 command to make it. Fill this folder with the images in step 3, by doing cp -r /mnt/us/>>FILENAME<>IMAGENAME<< /mnt/base-mmc/opt/amazon/screen_saver/600×800 for each image. When I did the move command for a folder, it just slapped the folder into the destination folder, which is no use. If you know a better way, use it!
Basically, the ideal solution is to have ls /mnt/base-mmc/opt/amazon/screen_saver/ report back '800×600' and 'adunits', and ls /mnt/base-mmc/opt/amazon/screen_saver/800×600 to report back all the files from the link above with their correct names. If any directories exist which are weird, use rm -r -f <> to get rid of them.
Once I had it set up as such, trying an update worked! :)

Report comment
Reply
Will any of this work with 4.1? I’m reluctant to try until I hear of some successes. Also, the root password generator page doesn’t have a listing for 4.1, so I don’t know if the generated password will work.

Report comment
Reply
1. Yes, it does work with 4.1. The root password generator works as well.
  Before you start, take some time to read all the steps and get an idea of what you are doing. It always helps.
  – Get root password
  – SSH to your device using the password by the usbNet method
  – Backup the existing folders by renaming [Very important step]
  – execute the commands to link custom screensavers folder
  This method is much better than some of the other methods you’ll find that involve updating firmware on the device.
  It is possible to revert to default setting, by just removing the links and reverting to the backed-up folders. Hence, always remember to backup and cross-check before proceeding.
  
  Report comment
  Reply
  1. Can you please give more info? I used this hack when I first got my kindle, and I want to do the software update, and remove the hack, but I don’t know how. Also it appears that the root password has changed since I did the hack, is that possible?
    
    Report comment
    Reply
does anyone have the stuff inside
/mnt/base-mmc/opt/amazon/screen_saver/
everything the 800×600 and adunits

Report comment
Reply
Hey all,
For linux users trying to ssh into the kindle 4, assign the ip via ifconfig to usb0. For me to get it to work (after trying all the basic approaches) I needed to put the desired wallpapers directly into a real folder (not symlink) located at /mnt/base-mmc/opt/amazon/screen_saver/600×800. The symlink wouldn’t work – someone else mentioned this in the comments and that tipped me off, but I thought I’d explicitly second this approach.

Report comment
Reply
Does it have to be a youtube video? Can some reply with a step-by-step? Please? Youtube doesn’t work on my computer. :(

Report comment
Reply
Rather than replacing the screensaver, is there a way to just keep the current book page displayed when it powers down?

Report comment
Reply
Soo, I’m on 4.1.1 now and even copying the files directly to /mnt/base-mmc/opt/amazon/screen_saver/600×800 does nothing. Any ideas?

Report comment
Reply
1. Found it, just change the adunits folder in /var/local to a limited access file (like 444) with the same name and voila! Information wants to be free!
  
  Report comment
  Reply
Tell the guy making this video to wake up rather than sounding half asleep. Edit the video- who really cares to see the system reset?

Report comment
Reply
1. do it yourself biatch!
  
  Report comment
  Reply
Do you mind if I quote a few of your articles as long as I provide credit and sources back to your weblog? My blog site is in the exact same area of interest as yours and my visitors would certainly benefit from a lot of the information you provide here. Please let me know if this alright with you. Thanks a lot!
raiditem https://raiditemwowgold123.tumblr.com/

Report comment
Reply

Please be kind and respectful to help make the comments section excellent. (Comment Policy)

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Follow on facebook Follow on twitter Follow on youtubeFollow on rssContact us

A Modern Take On An Old Language
No comments
Austraila’s Controlled Loads Are In Hot Water
86 Comments
Laser Cutters: Where’s The Point?
25 Comments
Audio On Pi: Here Are Your Options
33 Comments
Raspberry Has A New Pico, Built With The New RP2350
129 Comments

FAQs

How do I set a custom screensaver on my Kindle? ›

How to set your eBooks' covers as your Kindle's screensaver

On your Kindle home screen, tap the arrow down button at the top.
Go to All Settings.
Select Device Options.
Turn on the toggle switch for Display Cover.
Turn off your screen and turn it back on.

Sep 20, 2023

Discover More ›

What format should Kindle screensaver be? ›

Adding new screensavers

The Kindle takes screensaver image sizes of 600x800 pixels (or 824x1,200 pixels on the DX), in either JPEG or PNG format.

Know More ›

How do I turn off my kindle screensaver? ›

Open your Amazon app and go to settings.
In settings, select "Display and Sounds".
Immediately, screensaver should appear as the first option.
3.1. After clicking 'screensaver', scroll down to 'start time'
3.2. Disable the start time by clicking 'never'.

Tell Me More ›

How do I set a custom Screen saver? ›

Select the Start button, then go to Settings > Personalization > Lock screen, and select Screen saver settings. In the Screen Saver Settings window, choose a screen saver from the drop-down list.

Read On ›

What is Kindle preferred format? ›

Kindle Package Format (KPF)

Using KPF files allows your eBook to easily format and fit all Kindle devices. It's a go-to method for avoiding any formatting issues. You can create a KPF file using Kindle Create.

Discover More ›

How do I know what Kindle format I have? ›

If you are unable to clearly read the model number of the back of the Kindle then you can find the model details by opening the menu (three vertical dots) in the top right corner, selecting Settings, choose Device Options. You'll find the model details mentioned there clearly.

See Details ›

Is it better to turn off Kindle screen or sleep? ›

When turned off, the screen is blank. The Kindle Paperwhite uses its battery power only for page turns, so there's no difference in battery usage between putting the device in Sleep mode and turning it off. In general, it's best to simply put the device in Sleep mode instead of turning it off.

Find Out More ›

Does the Kindle lock screen always stay on? ›

If you do not reopen the kindle after a few mins (cant remember how long, less 3 mins on mine), the kindle itself automatically shuts off. The backlight will disappear but the screensaver remains. The e-ink does not take battery once it is on your screen, it can remain on the screen while the kindle is off.

Learn More Now ›

How to put Kindle in sleep mode? ›

If you're not using your Kindle, tap the power button to put it into sleep mode. By doing so, it doesn't need to use power to light up the screen ready for you to use it. Disable the Wi-Fi. Disable your internet connection to your Kindle by swiping from the top down to bring up the quick settings.

See Details ›

Can you put a screensaver on a Kindle? ›

so all you're gonna have to do is click on the 3 dots. up in the right corner, select Settings, select Device Options, and then you will turn on Display Cover. and then your Kindle will show the book. that you're currently reading as the lock screen.

Read On ›

Why doesn't my Kindle have the display cover option? ›

Check your compatibility

The Display Cover feature is available on the without-ads versions of select devices, including Kindle (8th Gen and above), Kindle Paperwhite (7th Gen and above), Kindle Oasis and Kindle Voyage. Or shop our latest devices below.

Discover More Details ›

Why do some Kindle books not have a cover? ›

If it's a book you purchased from Kindle Store, on the whole, the book cover can always display well. But if the covers are not showing in the Library, the main reason is the bad Network. It's very easy to solve this issue: Keep the wifi turned on and give it some time to download the cover.

Explore More ›

Can I set a background on my Kindle? ›

You cannot change the background color to anything other than white or black. The Kindle Paperwhite allows you to switch between light (white background and black text) and dark mode (black background and white text).

Get More Info Here ›

How do I add a picture to my Amazon Screen saver? ›

Display Photos on your Echo Show and Fire TV

Select the Smile icon.
Select Personalize Amazon devices.
Choose a device.
Select Add collections.
Select from your shared photo albums.

View Details ›

How do I add a cover photo to my Kindle? ›

How to update your cover

Go to your Bookshelf.
Next to the book you want to update, click the ellipsis button ("…").
Choose Edit content.
Scroll down to the "Cover" section.
Choose Launch Cover Creator or Upload your cover file to update your cover or upload a cover you already have.

More items...

Custom Screensaver On The Non-touch Kindle 4 (2024)

Leave a Reply

A Modern Take On An Old Language

Austraila’s Controlled Loads Are In Hot Water

Laser Cutters: Where’s The Point?

Audio On Pi: Here Are Your Options

Raspberry Has A New Pico, Built With The New RP2350

FLOSS Weekly Episode 796: Homebrew, I’m More Of A Whopper Guy

Hacker Tactic: Pimp Your Probes

Portable Router Build: Picking Your CPU

Hackaday Links: August 11, 2024

Better Living Through Hackery

FAQs

How do I set a custom screensaver on my Kindle? ›

Why doesn't my Kindle have the display cover option? ›

References