LITTER-ROBOT 3 HANDBUCH Pdf-Herunterladen (2024)

FAQs

How to manually cycle Litter-Robot 3? ›

Clean Cycle

The patented sifting system separates the clumps from the clean litter and deposits them into the Waste Drawer below. It takes about 2 minutes. You can also press the Cycle button to start a Clean cycle. During a Clean cycle, press any button to pause the cycle.

The only litter that won't work with the Litter-Robot 4 is anything strictly absorbent, non-clumping or loose-clumping. Common examples include wood pellet litter and pine-based litters. Then comes the tricky part: getting your cats to actually use the litter box.

We recommend up to 4 indoor cats per single Litter-Robot; however, we do have customers with more cats using a single unit. As a rule of thumb, one cat using Litter-Robot 3 requires that the drawer be emptied once per week; two cats, twice per week; three cats, every other day, and so on.

You can continue to use the Litter-Robot as a self-cleaning litter box while we troubleshoot this issue. It will still work as expected even without app activity.

IMPORTANT: Any time you do anything that affects the weight or placement of the unit, including adding or removing litter, emptying the waste drawer, or moving or cleaning the unit, press the Reset button once you are done.

Check for obstructions blocking the drawer full indicator (DFI) sensors. There are two sensors inside the base, above where the waste drawer would sit. Debris, such as dust or cat fur, can interfere with the DFI sensor. This can cause the unit to inaccurately trigger a drawer-full indication.

Litter-Robot does not require special bags or liners for the waste drawer, but clear bags work best. Customers often use 10- to 13-gallon clear kitchen garbage bags or large clear plastic grocery bags. Please note that waste level readings may be inaccurate when using a dark bag, especially when the drawer is empty.

In fact, one Litter-Robot is suitable for up to four cats.

All you have to do is empty the waste drawer when indicated and add litter as needed. For a household with one cat, that's about every 7-10 days. For multiple cat households, that's about once per week!

Litter-Robot works well with almost any clumping or scoopable litter. Litter beads and crystals that are small enough to pass through the screen will also work. Litter-Robot is not compatible with litters that are strictly absorbent, non-clumping, loose-clumping, newspaper-based, or wood-based pellets.

The Litter-Robot 3 Connect isn't obnoxiously loud, but I'd say it's at least twice as loud as the Litter-Robot 4. (The sound level is similar to an electric can opener or a bathroom fan.) For what it's worth, the sound doesn't bother my cats at all.

Which is bigger Litter-Robot 3 or 4? ›

Larger waste drawer

The Litter-Robot 4 waste drawer is 20 percent larger than Litter-Robot 3's.

How often you will need to empty the waste drawer depends on the number and size of your cats. For two average-sized cats, twice per week is typical. For a single cat, once per week is usually sufficient. You can use Litter-Robot custom-fit waste drawer liners or any 8-13-gallon (30-49L) trash bags.

When turning the unit ON, the light bar will display a solid blue light indicating it is ready for use. With the unit powered ON, a 3-second long press of the Power button will turn the unit OFF. Press the Cycle button to start a Clean cycle. Press the Cycle button again to pause or resume the cycle.